VPA Omega 2 Blade 1 1/16″ Right Bevel S7

Say hello to the new VPA Omega Broadhead! A solid, one-piece, precision-machined, American-made broadhead that combines all the desirable features of a single bevel head with the strength of double bevel head. And the greatest feature of all? It’s patent-pending LAYFLAT™ sharpening technology makes it the easiest two-blade ever to sharpen.

The smoothly integrated ferrule forms a wedge from tip to tail, designed to hold the wound channel open allowing the arrow shaft to pass through without interference. The sharp Tanto tip cuts on contact, time-tested for penetrating meat and bone. Directly following the tip is a massive asymmetric blade section that uniquely combines the bone splitting action of a single bevel broadhead with the inherent toughness of a double bevel broadhead. After the bone begins to split, the mechanical advantage of the wedge-shaped ferrule acting in concert with rotation of the true single bevel blades cause devastating fracturing of the bone. The sharp single bevel blades then slice through arteries and organs like a fine razor, causing massive bleeding and deep penetration.

Machined from S7 tool steel and hardened to 56-58 Rockwell, the VPA Omega is manufactured from a premium material that improves durability, dependability, and edge retention.

The VPA Omega broadhead is stronger than any other Single bevel on the market. Here’s why…

Looking from the tip, the first third of the broadhead is an offset diagonally symmetric double bevel at 40 degrees. The following two-thirds of the broadhead is a single bevel at 26 degrees from the factory.  

The double bevel portion of the broadhead integrates the blades and the ferrule in an offset diagonally symmetric monolithic unit – creating our patent-pending LAYFLAT™ sharpening technology.  This geometry allows the double bevel blades to initiate rotation through bone and tissue as if it were a single bevel broadhead, while maximizing all the strength inherent in the integrated ferrule and blade design.

In addition to making this broadhead extremely easy to sharpen, the LAYFLAT™ sharpening technology allows for the single bevel portion of the blades to be micro-beveled at 40 degrees – if desired by the hunter. This optional microbevel further enhances the durability of the blade edges when encountering bone.

The VPA Omega features a 1 1/16″ cutting diameter – designed purposefully to maintain excellent flight characteristics while also aiding in deep penetration and minimizing deflection from bone impact. This game-changing broadhead sets a new standard for single bevels.

Single Bevels have skyrocketed in popularity over the past couple years, and there’s no questions why — they cause devastating fracturing of the bone. The major drawback of Single Bevels, however, is that they can be extremely difficult to sharpen. Typically you must purchase a jig or tool to maintain the correct angle of the heads when sharpening. With the VPA Omega, that drawback is eliminated. All that is required to sharpen this head is the head itself and a sharpening stone, sandpaper, or whatever you prefer to sharpen with. To sharpen this broadhead, you simply lay it flat and push forward. No jig required – it’s an end to the old way of doing things. Minimal work – maximum results.

The VPA Omega is the only single bevel broadhead you can sit in the tree stand and resharpen with ease – no jig, no hassle. This never-before-seen technology makes the VPA Omega revolutionary – it’s quality, dependability, and effortless maintenance makes it unlike any other broadhead on the market.  Shoot, resharpen, reuse, repeat.

Note: Match right bevel with right helical vanes/feathers and left bevel with left helical vanes/feathers. Broadheads come with a factory grind. Final sharpening is recommended prior to hunting.

Mechanical Advantage of the ferule is 8.5